|
|
Type of Damages & Reasons for the Damages
Water Marks
/ Spots: Are caused by the use of technical water for cleaning,
which contains high levels of Chlorine & Calcium that is left
drying on the window surface, also salt-water that stays on the
window surface for longer periods of time, causes damage to the
glass surface, (Water Spots Cause Cavities on the Surface of the
Glass).
- Acid marks: The use of products that contain Acids, like Rust-remover
& Rust-wash etc. are very bad for the windows, and can cause
damage to the glass that is beyond repair (Acid Causes the glass
to fade).
- Mineral Deposits: Are caused by lawn sprinklers, and are easily
removed with Venco Marine Window Polish & Stain Remover.
The Solution to Restore Damaged Windows
Water
Marks / Spots: Can very easily be kept off the surface by the use
of Venco Marine, Window Treatment System, with a regular maintenance
schedule, and the windows will look clean and new at all time. Venco
Marine, Window Polish & Stain Remover will remove the water
Marks / Spots, and polish the shine back to the glass surface.
Acid Damage: Venco Marine, Window Polish & Stain Remover will
polish the shine back to the glass surface.
Benefits
- Proper window Maintenance is very important in order to avoid
Permanent damage to the window, that can be very costly if windows
need to be replaced.
- When the windows look clean it gives a good impression.
- With Venco Marine, Window Treatment System, the time needed
for cleaning the windows will go faster, and also a lot easier
because the dirt will not stick to the window surface.
The Treatment will last for 8 to 12 months under normal circumstances.
Why Use: Venco Marine, Window Polish
& Stain Remover
• Water based product. (no acid components)
• Will not damage surrounding frames etc.
• No harmful fumes.
• Easy to clean up, after treatment of the windows.
• Produces excellent results.
• Very Easy to work with.
• Cost efficient.
• 1 Liter cover from 20 up to 100 square meter, depends on
how bad the windows are.
Daily / Weekly Cleaning of the Treated Window Surface
- Use a regular water-hose when cleaning the windows, (No High
Pressure)
- Use regular soap-water for cleaning, we recommend Venco Marine
Protective Polymer Soap, this soap maintains the polymer on the
window surface, which makes the treatment last longer. (use a
soft brush or window mitts)
- Also it is recommended to squeegee the windows on a regular
schedule.
- The Venco Marine Window treatment will under normal circumstances
last for 8 to 12 months.
|
|